Put enough water into the tub to cover the item to be stripped and add the stripping salts. Then connect the black (negative) wire of the battery charger to the part to strip and the Positive (red) wire to the stainless spoon/iron. Make sure that the items can not touch each other. When switched on small bubbles will form showing the stripping process has begun. Use 12 volts and no more than 10 amps because remember this: It is not just the voltage that can kill but amps definatly will.

 

RUST BATH  TO  REMOVE RUST  FROM THE PRODUCT THAT IS GOING TO BE CLEANED TO BARE METAL